Z-Wave flush-mounted, 1-gang Dimmer from Aeotec - DSC19 with Power Metering feature.
The Aeotec Micro Smart Energy Illuminator G2 is a Z-Wave dimmer module specifically used to enable Z-Wave command and control (On/Off/Dim) of existing in-wall switches. It can also report immediate wattage consumption or kWh energy usage over a period of time. Device powered from the mains supply and is a three-wire design which requires a neutral connection. In the event of Power failure, non-volatile memory retains all programmed information relating to the units operating status.
- Communicates via Z-Wave RF (868,42 MHz)
- Range: up to 30m in buildings
- Power Metering feature
- Soft start
- With memory function of the last lighting level settings
- Can be operated by mono-stable or bi-stable push-buttons
- Load: Max 575W (for resistive loads) or 2.5A
Attention! Be sure that light source can be used with Triac (Leading Edge/Phase Control) dimming mode. A load that is not designed for Triac dimming can cause failure of the connected device or dimmer. Halogen lights with switching power supply, LEDs and CFLs must not be attached to this dimmer.
Click here to visit Aeotec Support page for Micro Smart Energy Illuminator G2