Universal Receiver - UM7206

New product

kr. 398,40

1 Item
in stock
Warning: Last items in stock!

- +

Add to compare

More info

 X-10 Universal Receiver Module (E plug) - UM7206 from Marmitek.

The Universal X-10 receiver UM7206 contains an isolated contact relay and a piezo sounder (beeper). It can be set to operate as a beeper only, as an isolated contact relay only, or both. It can be set for momentary or continous operation for the sounder and/or isolated contact relay. The isolated contact relay is rated for 5A at 24V DC. When set to continous operation the relay contacts and/or the module beeps continously when an ON command is received. When an OFF command is received the relay contacts open and/or the beeper stops.
When set for momentary operation the relay contacts close and/or the beeper gives three or four beeps when an ON command is received. The relay contacts then open automatically after about 0,5 second and/ or the beeper stops automatically after three or four beeps. In this mode, OFF commands are ignored. The module has a test (ON) button and a unit OFF button.

  • Communicates via X-10 Powerline: 120 kHz ± 2 kHz / 2.5 Vpk-pk
  • Signal Sensitivity: 15mVpp Min., 50mVpp Max. at 120kHz
  • Input impedance: ≥ 55 Ohms (L - N) at 120 kHz
  • Supply Current: < 20mA capacitive
  • Contact Rating: 5A at 24V DC
  • Responds to X-10 Key codes: On, Off
  • Connectors: 2 x screw connector
  • Power consumption: ≤ 1W
Data sheet
Device TypeUniversal Receiver
Switching Capacity5A at 24V DC
Nominal Voltage230V AC ± 10%, 50Hz
Operating Temperature-10°C ~ 50°C
Dimensions (L x W x H) mm90 x 55 x 39

User Manual - UM7206

User and Installation Manual - Marmitek UM7206

Download (350.07k)

Write a review

Universal Receiver - UM7206

Write a review


No customer reviews for the moment.

11 other products in the same category:

Compare 0

No products

To be determined Shipping
kr. 0,00 Total

Check out