ZigBee 3.0 LED Driver 30W - ZG9105-30W-CC from Sunricher.
The SRP-ZG9105-30W-CC is a 30W, Dimmable LED Driver with 1 channel Constant Current output and adjustable current from 250ma to 1000ma by DIP switches on the driver, which enables it to be suitable for LED lights with different current. Power factor of the driver can be over 0.9 and efficiency is higher than 83%. It enables smooth and deep dimming to 0.1% without flickering and buzzing noise.
This device is based on ZigBee 3.0, so it can be linked to and controlled by max. 30 ZigBee remotes that support ZigBee Light Link through Touchlink. It also supports the new ZigBee Green Power feature and can bind to and be controlled by max. 20 ZigBee Green Power remotes directly, without gateway/hub.
- Communicates via ZigBee 3.0 RF (2,4 GHz)
- RF Range Typical: 40 meters
- Functions Control: Switch ON, switch OFF, DIM
- Compatible with universal ZigBee Master Controller/Coordinator
- Supports Touchlink commissioning
- Supports Find and Bind mode to bind a ZigBee remote directly without coordinator
- Supports ZigBee Green Power and can bind to and be controlled by max. 20 (GP) remotes
- Prepared for OTA software update
- LED Channels: 1
- Output type: Constant Current (CC)
- Max Load: 30W (1 channel) 250 - 1000mA Constant Current output
- Short Circuit, Overcurrent and Temperature Protection
- Suitable for Dump Locations
- SELV, LED Class 2 Power Supply
- Standby Power consumption: < 1,0W