Dimmer - ZMNHDD1

ZMNHDD1
New product

kr. 454,40

13 Items
in stock

- +

Add to compare

Accessories

 
More info

Z-Wave Plus flush-mounted, 1-way Universal Dimmer from Qubino - ZMNHDD1 with Power Metering feature.

This flush-mounted dimmer module can be used for dimming of light or to manage the speed of fan.
Supports control of Low Voltage halogen bulb with electronic transformer and dimmable Compact Fluorescent light. Qubino dimmer supports also the Classical Incandescent lights, halogen lamps operated by 230VAC (High Voltage Halogen) and dimmable LED lights.

  • Communicates via Z-Wave Plus RF (868,42 MHz)
  • Range: up to 50m free field, up to 30m in buildings
  • Group for Association: 11 (Group 1 support 1 node, Group 2 - 11 support 16 nodes)
  • For ohmic, inductive and capacitive loads, e.g. incandescent lamps, dimmable wound transformers, dimmable electronic transformers, dimmable LED and CFL lamps (Do not connect any mixed loads)
  • With memory function of the last lighting level settings
  • Module supports mono-stable and bi-stable switches (input I1, I2, I3)
  • Module supports NO and NC contact type (input I2, I3)
  • Dimmer type: Trailing edge (bidirectional MOSFET switch)
  • Load: 140W (230V AC); 21W (24V DC) (for resistive loads)
  • Load for fan motor: Max 100W mono-phase asynchronous motor
  • Power Metering feature
  • Power measurement accuracy: ±2W
  • Power consumption: 0,7W
  • Temperature control via connected DS18B20 sensor (optional)
  • Support for temperature sensor offset settings

Attention! This dimmer module also suitable for dimming of low-voltage halogen lighting, CFL tube lamps and LED based lamps.
The dimmer does not work for every installation, because not every transformer, CFL or LED can be dimmed. Dimmable electronic transformers, CFLs and LEDs as standard is marked as "DIMMABLE".
Non compatible light device may work but is likely can produce light flickering and (or) an audible humming or buzzing noise when dimmed. This noise and (or) flickering is usually a symptoms of internal stress, which in turn can cause failure of the connected device or dimmer. Add 20-30% to the total lamp wattage on a transformer circuit or 50% on LEDs circuit. This provides a margin for transformer and LEDs losses when calculating circuit loadings.

 
Data sheet
ProtocolZ-Wave Plus
Device TypeSlave with routing capabilities, Multilevel Switch
Supports Z-Wave Beaming Technology?Yes
Supports Z-Wave Network Security?Yes
Supports Z-Wave AES-128 Security S0?Yes
Supports Z-Wave Security S2?No
Firmware Upgradable?Yes
Power Metering Feature?Yes
Executive ElementMOSFET (Trailing edge dimmer)
Load140W (230V AC) / 21W (24V DC) (for Resistive Loads)
Nominal Voltage110 - 230V AC ±10% 50/60Hz or 24 - 30V DC
Operating Temperature-10°C ~ 40°C
ProtectionIP20
Dimensions (L x W x H) mm37 x 42 x 15,5
ColorBlue
 
Download

User Manual - ZMNHDD1

User and Installation Manual - Qubino ZMNHDD1

Download (538.14k)

Extended Manual - ZMNHDD1

Extended Technical Manual - Qubino ZMNHDD1

Download (4.52M)

Write a review

Dimmer - ZMNHDD1

Write a review

 
Comments(0)

No customer reviews for the moment.

30 other products in the same category:

Customers who bought this product also bought:

Compare 0

No products

To be determined Shipping
kr. 0,00 Total

Check out