Smoke Detector/Siren - P4001

POPE004001
New product

kr. 638,40

8 Items
in stock

- +

Add to compare

Accessories

 
More info

Z-Wave Plus Smoke Detector and Siren - 4001 from Popp.

The 4001 Smoke Detector and Siren is designed to sense smoke that comes into the detector chamber. This device is a combination of a Z-Wave Sensor (Smoke) and a Z-Wave Actuator (Siren). The device is either powered by battery or can be powered by an optional external power supply. It supports secure communication and will automatically recognize other smoke sensors sharing alarm messages to cover the whole home. This product consists of a standard photo electric smoke detector with a pluggable Z-Wave Plus wireless interface module. The smoke detector will also work as a stand alone product and is certified by VdS according to DIN EN 14604. The smoke chamber of the detector has a stainless steel reel with antistatic plastic chamber.
According to VdS 3515 (smoke detectors with wireless communication) this device will automatically send alarm signals to all other POPP smoke detectors to turn on their siren. The same time all POPP smoke detectors will further relay the alarm signals to any other detectors in wireless range. This function ensures that all smoke detectors will issue noise if one of them detected a smoke. Connection of the smoke sensors is fully automatical and needs no further configuration.

  • Communicates via Z-Wave Plus RF (868,42 MHz)
  • Range: up to 100m free field, up to 20m in buildings
  • Group for Association: 3 (Max 4 nodes per Group)
  • Security: AES-128 bit data encryption
  • Supports Z-Wave Beaming Technology
  • Over The Air (OTA) firmware upgrades
  • Photoelectric sensor particularly effective detecting smoke particle concentrations between 1.8 - 3.1%
  • Can also be used as an indoor siren
  • Built-in 85dB sounder and flashing red LED will indicate presence of smoke
  • Automatic self-calibration and self-test
  • Manual test button help to verify battery status and sensor operation
  • Low battery detection
  • Tamper proof protection
  • A lock prevents the installation of the device without battery
  • Compliance with: EN 14604:2005 and VdS certified
 
Data sheet
ProtocolZ-Wave Plus
Device TypeAlarm Sensor
Supports Z-Wave Beaming Technology?Yes
Supports Z-Wave Network Security?Yes
Supports Z-Wave AES-128 Security S0?Yes
Supports Z-Wave Security S2?No
Firmware Upgradable?Yes
Nominal Voltage1x (9.0V) Alkaline 6LR61 battery
Operating Temperature0°C ~ 55°C
ProtectionIP20
Dimensions (D x H) mm106 x 40
ColorWhite
 
Download

User Manual - 4001

User and Installation Manual - Popp 4001

Download (240.08k)

Write a review

Smoke Detector/Siren - P4001

Write a review

 
Comments(1)
26-10-2015
Temperature sensor?

Hi, in the descriptions is says "Additionally, the smoke detector contains a temperature sensor, which is used in parallel for detecting fires, avoiding false alarm and at the same time measuring the temperature in the room." I have bought a couple of these, and there is no temperature sensor.

  • Was this comment useful to you?
  • (1) (0)

30 other products in the same category:

Customers who bought this product also bought:

Compare 0

No products

To be determined Shipping
kr. 0,00 Total

Check out