Thermostat PWM - ZMNHLD1

ZMNHLD1
New product

kr. 558,40

3 Items
in stock

- +

Add to compare

Accessories

 
More info

Z-Wave Plus flush-mounted PWM Thermostat from Qubino - ZMNHLD1 with Power Metering feature.

Discrete Z-Wave PWM thermostat to control floor heating or radiator. This micro module makes it possible to manage the temperature of your heating floor using the PWM (Pulse Width Modulation) technology allowing an optimal regulation of the temperature and a constant temperature. You will therefore save energy thanks to this mode of operation. There are also several modifiable parameters such as P, I and D, the duration of a PWM cycle, maximum and minimum values, frost protection mode (to prevent freezing of water in pipes) or other options for The PWM system setting.

  • Communicates via Z-Wave Plus RF (868,42 MHz)
  • Range: up to 50m free field, up to 30m in buildings
  • Functions: Switch ON, switch OFF, Power Metering
  • Group for Association: 6 (Group 1 - 5 support 16 nodes, Group 6 support 1 node)
  • Module supports mono-stable switches (push button) and bi-stable switches.
  • Rated load current of AC output (resistive load): 1 x 0,85A (230V AC)
  • Rated load current of DC output (resistive load): 1 x 0,85A (24V DC)
  • Output circuit power of AC output (resistive load) = 1 X 200W (230V AC)
  • Output circuit power of DC output (resistive load) = 1 X 21W (24V DC)
  • Switching: MOSFET
  • Power measurement accuracy: ±2W
  • Power consumption: 0,7W
  • Temperature control via connected DS18B20 sensor (included)
  • Temperature Detecting Range: from -50°C to +125°C
  • Temperature Accuracy: ±0,1°C
 
Data sheet
ProtocolZ-Wave Plus
Device TypeSlave with routing capabilities, Binary Power Switch
Supports Z-Wave Beaming Technology?Yes
Supports Z-Wave Network Security?Yes
Supports Z-Wave AES-128 Security S0?No
Supports Z-Wave Security S2?No
Firmware Upgradable?Yes
Power Metering Feature?Yes
Executive ElementMOSFET
Switching Capacity200W (for Resistive Loads) or 0,85A/230V AC; 21W (for Resistive Loads) or 0,85A/24V DC
Nominal Voltage110 - 230V ±10% 50/60Hz or 24 - 30V DC
Operating Temperature-10°C ~ 40°C
ProtectionIP20
Dimensions (L x W x H) mm37 x 42 x 15,5
ColorBlue
 
Download

User Manual - ZMNHLD1

User and Installation Manual - Qubino ZMNHLD1

Download (365.5k)

Extended Manual - ZMNHLD1

Extended Technical Manual - Qubino ZMNHLD1

Download (3.6M)

Write a review

Thermostat PWM - ZMNHLD1

Write a review

 
Comments(0)

No customer reviews for the moment.

30 other products in the same category:

Customers who bought this product also bought:

Compare 0

No products

To be determined Shipping
kr. 0,00 Total

Check out