Switch 1-way - AWM2 Sale

Switch 1-way - AWM2

Reduced price!
AWM2
New product

kr. 648,00

kr. 798,00

-kr. 150,00

3 Items
in stock
Warning: Last items in stock!

- +

Add to compare

 
More info

 X-10 Flush Mounted Switch MicroModule (1-way) - AWM2 from Marmitek.

The AWM2/SAIX MicroModule enables you to remotely control lights and appliances up to 2300W. The MicroModule should be connected to your (230V) mains and mounted in a wall- or junction box. The module transforms your existing switch into a X-10 controllable switch, therefor you are able to control your connected device remotely with X-10 commando’s through your existing mains and locally with the switch. The AWM2/SAIX use a 2-way communication and is therefore able to transmits the switch mode (ON/OFF) to other modules which are set to the same HouseCode and UnitCode. This enables you, by example, to control more lights/devices simultaneously.

  • Communicates via X-10 Powerline: 120 kHz ± 2 kHz / 2.5 Vpk-pk
  • Signal Sensitivity: 25 mVpp...6 Vpp at 120 kHz ± 4 kHz
  • Transmission synchronization: 1 pulse burst at 0°/180°
  • Signal transmission: > 5Vpp in 5 Ohm at 120 kHz ± 1kHz
  • Signal/noise ratio: 1,35:1
  • X-10 Key codes: All units Off, All Lights On, On, Off, Status Request
  • Switching capacity: 2300W (resistive load), 500W (inductive/capacitive load)
  • Switch use: normal switches (make/break) or Momentary switches

 Note! Adjustable automatic (two-way communication) status request.

 
Data sheet
ProtocolX-10
Device TypeTransmitter and Switch Module
Switching Capacity2300W (resistive load), 500W (inductive/capacitive load)
Nominal Voltage230V AC ± 10%, 50Hz
Operating Temperature-10°C ~ 35°C
ProtectionIP20
Dimensions (L x W x H) mm46 x 46 x 16
ColorBlack
 
Download

User Manual - AWM2

User and Installation Manual - Marmitek AWM2

Download (966.65k)

9 other products in the same category:

Compare 0

No products

To be determined Shipping
kr. 0,00 Total

Check out