Dimmer 2-way - S2223E

Reduced price!
S2223E
New product

kr. 348,00

kr. 448,00

-kr. 100,00

14 Items
in stock

- +

Add to compare

Accessories

 
More info

 X-10 2-way (2-Wire) Dimmer Module - S2223E from Super.

Double-button Wall mounted dimmer. As the S2223E is a 2-wire type Module it can control only incandescent lamps. Module can not be used for inductive and capacitive loads like Fluorescent and Energy-saver lamps, low-voltage halogen lighting with electronic transformer. Can be controlled with any X-10 controller through the existing house wiring or by hand. Provided with a soft start, soft dim and a memory for the last dim level. The unit’s Address and Options data are all stored in permanent memory and are preserved through a loss of power.

  • Communicates via X-10 Powerline: 120 kHz ± 2 kHz / 2.5 Vpk-pk
  • Signal Sensitivity: better than 25 mVpp at 120 kHz
  • X-10 key codes to respond to: All units Off, All Lights On, On, Off, Dim, Bright
  • Load capacity: 2x (60 - 200W) for Resistive Loads
  • Soft start and smooth dimming features
  • Power consumption: < 1W

 Attention! The module is not suitable for dimming and controlling low-energy light bulbs and tube lighting. An Appliance module should be used.

 Note! 2-Wire installation. Neutral wire not required.

 
Data sheet
ProtocolX-10
Device TypeDimmer Module
Executive ElementTRIAC (Leading Edge/Phase Control dimming mode)
Load2x (60 - 200W) for Resistive Loads
Nominal Voltage230V AC ± 10%, 50Hz
Operating Temperature-10°C ~ 50°C
ProtectionIP20
Dimensions (L x W x H) mm93 x 85 x 25
ColorWhite
 
Download

User Manual - S2223E

User and Installation Manual - Super S2223E

Download (62.17k)

Write a review

Dimmer 2-way - S2223E

Write a review

 
Comments(0)

No customer reviews for the moment.

10 other products in the same category:

Compare 0

No products

To be determined Shipping
kr. 0,00 Total

Check out