Switch/Controller - HE-ZW-SW-5A

New product

kr. 1.038,40

62 Items
in stock

- +

Add to compare

 
More info

Z-Wave Plus S2 Wall Mounted Switch/Controller - HE-ZW-SW-5A from Heltun.

The HELTUN 5 channel wall touch panel switch/controller replaces an existing in-wall switch and enables manual or remote switch (On/Off) control of lights, blinds, motors and heating systems with a maximum load of 5A for each channel.
Device has two independent inputs for the relay channels which allows it to control systems with different power sources or to use outputs as dry contacts. Each relay can be controlled by the switcher touch buttons or independently via a Z-Wave gateway.
The touch panel has five sensitive capacitive touch control buttons with a two-color (red and blue) backlight for each button. Button backlight brightness can be adjusted automatically depending on the illumination of the ambient environment or manually in the settings.
Each touch button can be configured to control any relay (from one up to five) output state in 7 different modes. The buttons also can be used as controller scene activators and the backlight can indicate the gateway mode or associated device status.
The HELTUN wall panel switch has internal air temperature sensor, humidity and light sensors and is also equipped with built-in power consumption logic. Device supports 11 endpoints and 30 groups for association which allow associating and control up to 90 different Z-Wave devices.

  • Communicates via Z-Wave Plus RF (868,42 MHz)
  • RF Range Typical: up to 100m in a free field, up to 30m in buildings
  • Standard and enhanced security: S0 (AES-128 encryption), S2
  • Over The Air (OTA) firmware upgrades
  • Supports Scenes and Associations
  • Group for Association: 21 (Group 1 support 1 node, Group 2 - 21 support 3 nodes)
  • Endpoints: 11
  • Touch-buttons: 5-gang
  • Red and Blue color LED back light for each button
  • Buttons back light: 4 levels adjustable brightness
  • All touch buttons can be assigned free
  • Independent control of each relay and LEDs
  • 5 channel relay output, resistive load up to 5A each
  • 2 independent relays outputs (potential free)
  • Measured temperature range: -30°C to +80°C
  • Temperature measurement accuracy: ±0.5°C
  • Measured humidity range: 0 - 80% RH
  • Humidity measurement accuracy: ±3.0% RH
  • Internal ambient light sensor measuring range: 0 - 30000 Lux
  • Power consumption logic
  • Power consumption: 1.5W

Attention! This switch module have potential free relay outputs.

 
Data sheet
ProtocolZ-Wave Plus S2
Device TypeWall Controller
Supports Z-Wave Beaming Technology?Yes
Supports Z-Wave Network Security?Yes
Supports Z-Wave AES-128 Security S0?Yes
Supports Z-Wave Security S2?Yes
Firmware Upgradable?Yes
Power Metering Feature?Power consumption logic
Executive ElementRelay
Switching Capacity5x 5A Max (for resistive load)
Nominal Voltage110 - 240V AC ± 10%, 50/60Hz
Operating Temperature-20°C ~ 50°C
ProtectionIP21
Dimensions (L x W x H) mm89 x 89 x 9 (Front); 53 x 53 x 28 (Back part)
 
Download

User Manual - HE-ZW-SW-5A

User and Installation Manual - Heltun HE-ZW-SW-5A

Download (1.65M)

Write a review

Switch/Controller - HE-ZW-SW-5A

Write a review

 
Comments(0)

No customer reviews for the moment.

30 other products in the same category:

Customers who bought this product also bought:

Compare 0

No products

To be determined Shipping
kr. 0,00 Total

Check out