Thermostat - HE-ZW-THERM-FL2

New product

kr. 1.278,40

51 Items
in stock.

- +

Add to compare

Accessories

 
More info

Z-Wave Plus S2 Controlled Thermostat - HE-ZW-THERM-FL2 from Heltun.

This is a programmable electronic room heating thermostat for flush mounting into standard wall boxes. It is designed to maintain a constant ambient temperature, the criteria of which can be simultaneously either floor, room or both temperature sensors. It is recommended for the control of electric heating devices (radiators, convectors, electric fireplace), boilers or electric under floor heating. The heating element is directly controlled by a single pole switch.
The thermostat has an LCD screen, six sensitive capacitive touch control buttons and two temperature sensors (external NTC floor sensor and a built-in room air temperature sensor). The thermostat is also equipped with built-in humidity, illumination and energy consumption sensors.
One of six operation modes can be selected either manually or via the Z-Wave Controller/Gateway. The 6 operating modes are: COM - most comfortable (full power) mode, TIME – control the temperature by day time, DRY - floor quick drying mode, ECO – energy saving mode, VAC – vacation mode and MAN - manual control mode. The thermostat protects the floor from overheating by automatically switching off the load when the temperature reaches a maximum.

  • Communicates via Z-Wave Plus RF (868,42 MHz)
  • Range: up to 30m in buildings
  • Standard and enhanced security: S0 (AES-128 encryption), S2
  • Over The Air (OTA) firmware upgrades
  • Group for Association: 2 (Group 1 support 1 node; Group 2 support 10 nodes)
  • Display: LCD-display 73 x 42mm, black with white icons
  • Display brightness adjustable feature
  • 6 Heating Modes
  • Hysteresis adjustable range: 0,1°C to 9,5°C (default: 0,5°C)
  • Measured temperature range: -30°C to +80°C
  • Temperature measurement accuracy: ±0.5°C
  • Measured humidity range: 0 - 80% RH
  • Humidity measurement accuracy: ±3.0% RH
  • Internal ambient light sensor measuring range: 0 - 30000 Lux
  • External input trigger feature
  • Child lock feature
  • Energy consumption meter
  • Relay contact rating: 3600W or 16A resistive
  • Power Supply: 100 - 230V AC 50/60 Hz
  • Power Consumption: 1,5W
  • Can be used with different external NTC temperature sensors (1 - 100 kOhm)
  • Floor temperature sensor NTC (10 kOhm, 3 meters length) included

Note: Wooden floor with electric underfloor heating requires that a floor sensor is connected. Thus, floor temperature is limited to 27°C.

 
Data sheet
ProtocolZ-Wave Plus S2
Device TypeThermostat
Supports Z-Wave Beaming Technology?Yes
Supports Z-Wave Network Security?Yes
Supports Z-Wave AES-128 Security S0?Yes
Supports Z-Wave Security S2?Yes
Firmware Upgradable?Yes
Power Metering Feature?Yes
Executive ElementRelay
Switching Capacity3600W or 16A (resistive) at 230V AC
Nominal Voltage230V AC 50/60 Hz
Operating Temperature0°C ~ 50°C
ProtectionIP21
Dimensions (L x W x H) mm89 x 89 x 9 (Front); 53 x 53 x 28 (Back part)
 
Download

User Manual - HE-ZW-THERM-FL2

User and Installation Manual - Heltun HE-ZW-THERM-FL2

Download (1.76M)

Write a review

Thermostat - HE-ZW-THERM-FL2

Write a review

 
Comments(0)

No customer reviews for the moment.

30 other products in the same category:

Customers who bought this product also bought:

Compare 0

No products

To be determined Shipping
kr. 0,00 Total

Check out