Dimmer - ZMNHSD1

ZMNHSD1
Ny produkt

kr. 748,00

12 enheter
på lager

- +

Legg til i sammenligningen

 
Mer info

Z-Wave Plus DIN-rail, 1-way Universal Dimmer from Qubino - ZMNHSD1 with Power Metering feature.

This DIN-mounted dimmer module can be used for dimming of light or to manage the speed of fan. Supports control of Low Voltage halogen bulb with electronic transformer and dimmable Compact Fluorescent light. Qubino dimmer supports also the Classical Incandescent lights, halogen lamps operated by 230V AC (High Voltage Halogen) and dimmable LED lights.
Module measures Power consumption of bulb or fan. It is designed to act as repeater in order to improve range and stability of Z-Wave network.

  • Communicates via Z-Wave Plus RF (868,42 MHz)
  • Range: up to 50m free field, up to 30m in buildings
  • Group for Association: 5 (Group 1 support 1 node, Group 2 - 5 support 16 nodes)
  • For ohmic, inductive and capacitive loads, e.g. incandescent lamps, dimmable wound transformers, dimmable electronic transformers, dimmable LED and CFL lamps (Do not connect any mixed loads)
  • With memory function of the last lighting level settings
  • Module supports mono-stable and bi-stable switches (input I)
  • Dimmer type: Trailing edge (bidirectional MOSFET switch)
  • Load: 200W (230V AC); 21W (24V DC) (for resistive loads)
  • Load for fan motor: Max 100W mono-phase asynchronous motor
  • Power Metering feature
  • Power measurement accuracy: ±2W
  • Return to previous Status after Power loss
  • Can be programmed to send "All ON" and "All OFF" commands
  • Can be programmed with Double click function (set to maximum dimming value)
  • Power consumption: 0,7W
  • Display elements: LED for status display

Attention! This dimmer module also suitable for dimming of low-voltage halogen lighting, CFL tube lamps and LED based lamps.
The dimmer does not work for every installation, because not every transformer, CFL or LED can be dimmed. Dimmable electronic transformers, CFLs and LEDs as standard is marked as "DIMMABLE". Test the combination first!
Non compatible light device may work but is likely can produce light flickering and (or) an audible humming or buzzing noise when dimmed. This noise and (or) flickering is usually a symptoms of internal stress, which in turn can cause failure of the connected device or dimmer. Add 20-30% to the total lamp wattage on a transformer circuit or 50% on LEDs circuit. This provides a margin for transformer and LEDs losses when calculating circuit loadings.

 
Datablad
ProtokollZ-Wave Plus
EnhetstypeSlave with routing capabilities, Multilevel Switch
Støtter Z-Wave Beaming teknologi?Ja
Støtter Z-Wave nettverkssikkerhet?Ja
Støtter Z-Wave AES-128 sikkerhet S0?Ja
Støtter Z-Wave sikkerhet S2?Nei
Firmware oppgraderbar?Ja
Strømmålingsfunksjon?Ja
StyreelementMOSFET (Faseavsnitt dimmer)
Belastning200W (230V AC) / 21W (24V DC) (for resistiv last)
Nominell spenning110 - 230V AC ±10% 50/60Hz eller 24 - 30V DC
Driftstemperatur-10°C ~ 40°C
BeskyttelseIP20
Størrelse (L x B x H) mm93 x 18 x 58
FargeGrå
 
Last ned

Brukerveiledning - ZMNHSD1

Installasjon og brukerveiledning - Qubino ZMNHSD1

Last ned (431.63k)

Utvidet Manual - ZMNHSD1

Utvidet Teknisk Brukerveiledning - Qubino ZMNHSD1

Last ned (3.67M)

Skriv en produktanmeldelse

Dimmer - ZMNHSD1

Skriv en produktanmeldelse

 
Kommentarer(0)

Ingen kundeanmeldelser for øyeblikket.

 
Videopresentasjoner

30 andre produkter i samme kategori:

Kunder som kjøpte dette produktet kjøpte også:

Sam-lign 0

Ingen produkter

Avgjøres senere Frakt
kr. 0,00 Totalbeløp

Gå til kasse