Z-Wave Plus MultiSensor (6 in 1) - ZW100 fra Aeotec.
The Aeotec MultiSensor 6 packs a lot of monitoring power into one small, elegant device. The sensor detects motion, vibration, temperature, humidity, ambient light, UV light and reports data back to your Z-Wave controller. For superior accuracy, MultiSensor 6 can be calibrated for every room and every environment with manual calibrations wirelessly available for its temperature, humidity, light and UV measurements.
Monitor the Room in Six Different Ways
Motion - The Multi-Sensor 6 detects motion up to 5 meters away within 120°, perfect for monitoring activity in any average-sized room in your home.
Vibration - A slight vibration of the built-in seismic sensor can indicate multiple events, including tampering, intrusion, or an earthquake. If the wall shakes where the sensor is installed, for example, this could indicate movement caused in a variety of ways. Perhaps a burglar in another room has bumped into the other side of the monitored wall. Although that room has no sensor in it, the sensor on the other side will feel the vibration enough to alert you to the intrusion.
Temperature - Maintain the perfect room temperature while conserving energy by letting the Multi-Sensor 6’s temperature sensor communicate with and trigger your other Z-Wave devices (such as a Z-Wave thermostat or motorized window coverings). Built into each Multi-Sensor is an incremental temperature sensor that accurately measures between -10° to 50°C and reports significant changes back to your Z-Wave controller.
Humidity - The Multi-Sensor 6 measures the room’s humidity ranging from 20% to 95%. Like the temperature sensor, the built-in incremental humidity sensor can help you manage your home’s temperature and energy use, as well as cleanliness. If the sensor is installed in your bathroom, for example, you could trigger a Z-Wave controlled fan to turn on when the Multi-Sensor 6 detects increased humidity.
Ambient Light - Automate your Z-Wave controlled lights with help from the Multi-Sensor 6. The built-in digital light sensor detects ambient light levels ranging from 0 lux to 1000 lux, allowing you to program Z-Wave lights and curtains to create the perfect ambiance at any time of day.
UV Light - By measuring ultraviolet (UV) light, the Multi-Sensor 6 allows you to monitor for unique health risks and causes of property damage. Measured inline with the World Health Organisation’s UV Index, the Multi-Sensor 6 measures a room’s UV levels so that high levels can be reduced through automated curtains, or shades. This helps prevent risks like eye damage and furniture bleaching.
- Communicates via Z-Wave Plus RF (868,42 MHz)
- RF Range: up to 150m outdoors
- Security: AES-128 bit data encryption and tamper protection
- Over The Air (OTA) firmware upgrades
- Group for Association: 1 (Max 5 nodes)
- Motion Detection Range: from 3 to 5 meters within 120° field of view
- Temperature Measurement Range: -10° to 50°C, Accuracy: ±1.6°C
- Humidity Measurement Range: 20% to 80%, Accuracy: ±6%
- Light Measurement Range: 0 Lux to 30000 Lux
- Vibration Sensor : Act as tamper switch, ON or OFF
- Power: 2x CR123A batteries or via USB 5V DC
- Battery Life: 2 years
- Low battery detection
- Accessories included for wall/ceiling or surface-mounting
Klikk her for å besøke Aeotec Support og Firmvare oppdateringssiden for MultiSensor 6