Termostat PWM - ZMNHLD1

ZMNHLD1
Ny produkt

kr. 558,40

3 enheter
på lager

- +

Legg til i sammenligningen

Tilbehør

 
Mer info

 Z-Wave Plus flush-mounted PWM Thermostat from Qubino - ZMNHLD1 with Power Metering feature.

Discrete Z-Wave PWM thermostat to control floor heating or radiator. This micro module makes it possible to manage the temperature of your heating floor using the PWM (Pulse Width Modulation) technology allowing an optimal regulation of the temperature and a constant temperature. You will therefore save energy thanks to this mode of operation. There are also several modifiable parameters such as P, I and D, the duration of a PWM cycle, maximum and minimum values, frost protection mode (to prevent freezing of water in pipes) or other options for The PWM system setting.

  • Communicates via Z-Wave Plus RF (868,42 MHz)
  • Range: up to 50m free field, up to 30m in buildings
  • Functions: Switch ON, switch OFF, Power Metering
  • Group for Association: 6 (Group 1 - 5 support 16 nodes, Group 6 support 1 node)
  • Module supports mono-stable switches (push button) and bi-stable switches.
  • Rated load current of AC output (resistive load): 1 x 0,85A (230V AC)
  • Rated load current of DC output (resistive load): 1 x 0,85A (24V DC)
  • Output circuit power of AC output (resistive load) = 1 X 200W (230V AC)
  • Output circuit power of DC output (resistive load) = 1 X 21W (24V DC)
  • Switching: MOSFET
  • Power measurement accuracy: ±2W
  • Power consumption: 0,7W
  • Temperature control via connected DS18B20 sensor (included)
  • Temperature Detecting Range: from -50°C to +125°C
  • Temperature Accuracy: ±0,1°C
 
Datablad
ProtokollZ-Wave Plus
EnhetstypeSlave with routing capabilities, Binary Power Switch
Støtter Z-Wave Beaming teknologi?Ja
Støtter Z-Wave nettverkssikkerhet?Ja
Støtter Z-Wave AES-128 sikkerhet S0?Nei
Støtter Z-Wave sikkerhet S2?Nei
Firmware oppgraderbar?Ja
Strømmålingsfunksjon?Ja
StyreelementMOSFET
Maksimal belastning200W (for resistiv last) eller 0,85A/230V AC; 21W (for resistiv last) eller 0,85A/24V DC
Nominell spenning110 - 230V ±10% 50/60Hz eller 24 - 30V DC
Driftstemperatur-10°C ~ 40°C
BeskyttelseIP20
Størrelse (L x B x H) mm37 x 42 x 15,5
FargeBlå
 
Last ned

Brukerveiledning - ZMNHLD1

Installasjon og brukerveiledning - Qubino ZMNHLD1

Last ned (365.5k)

Utvidet Manual - ZMNHLD1

Utvidet Teknisk Brukerveiledning - Qubino ZMNHLD1

Last ned (3.6M)

Skriv en produktanmeldelse

Termostat PWM - ZMNHLD1

Skriv en produktanmeldelse

 
Kommentarer(0)

Ingen kundeanmeldelser for øyeblikket.

30 andre produkter i samme kategori:

Kunder som kjøpte dette produktet kjøpte også:

Sam-lign 0

Ingen produkter

Avgjøres senere Frakt
kr. 0,00 Totalbeløp

Gå til kasse