Bryter 1-veis - ZMNHAD1

ZMNHAD1
Ny produkt

kr. 568,00

9 enheter
på lager

- +

Legg til i sammenligningen

Tilbehør

 
Mer info

 Z-Wave Plus flush-mounted, 1-way Switch from Qubino - ZMNHAD1 with Power Metering feature.

This module is used for switching ON/OFF electrical devices remotely or through connected wall switch. The module is designed to be mounted inside a “flush mounting box”, hidden behind a traditional wall switch. Module measures power consumption of electrical device and supports connection of digital temperature sensor. It is designed to act as repeater in order to improve range and stability of Z-Wave network.

  • Communicates via Z-Wave Plus RF (868,42 MHz)
  • Range: up to 50m free field, up to 30m in buildings
  • Functions: Switch ON, switch OFF, Power Metering
  • Group for Association: 9 (Group 1 support 1 node, Group 2 - 9 support 16 nodes)
  • Module supports mono-stable and bi-stable switches (input I1, I2, I3)
  • Module supports NO and NC contact type (input I2, I3)
  • Rated load current of AC output (resistive load)*: 10A (230V AC)
  • Rated load current of DC output (resistive load)*: 10A (30V DC)
  • Output circuit power of AC output (resistive load): 2300W (230V AC)
  • Output circuit power of DC output (resistive load): 240W (24V DC)
  • Power measurement accuracy: 5 - 50W (±3W); ˃ 50W (±3%)
  • Power consumption: 0,4W
  • Temperature control via connected ZMNHEA1 sensor (optional)

 * In case of load other than resistive, pay attention to the value of cos φ and if necessary apply load lower than the rated load. Max current for cos φ=0,4 is 3A at 250V AC, 3A at 24V DC L/R=7ms.

 
Datablad
ProtokollZ-Wave Plus
EnhetstypeSlave with routing capabilities, Binary Power Switch
Støtter Z-Wave Beaming teknologi?Ja
Støtter Z-Wave nettverkssikkerhet?Ja
Støtter Z-Wave AES-128 sikkerhet S0?Nei
Støtter Z-Wave sikkerhet S2?Nei
Firmware oppgraderbar?Ja
Strømmålingsfunksjon?Ja
StyreelementRelays
Maksimal belastning2300W (for resistiv last) eller 10A/230V AC; 240W (for resistiv last) eller 10A/24V DC
Nominell spenning110 - 230V ±10% 50/60Hz eller 24 - 30V DC
Driftstemperatur-10°C ~ 40°C
BeskyttelseIP20
Størrelse (L x B x H) mm37 x 42 x 15,5
FargeBlå
 
Last ned

Brukerveiledning - ZMNHAD1

Installasjon og brukerveiledning - Qubino ZMNHAD1

Last ned (572.96k)

Utvidet Manual - ZMNHAD1

Utvidet Teknisk Brukerveiledning - Qubino ZMNHAD1

Last ned (5.58M)

Skriv en produktanmeldelse

Bryter 1-veis - ZMNHAD1

Skriv en produktanmeldelse

 
Kommentarer(0)

Ingen kundeanmeldelser for øyeblikket.

30 andre produkter i samme kategori:

Kunder som kjøpte dette produktet kjøpte også:

Sam-lign 0

Ingen produkter

Avgjøres senere Frakt
kr. 0,00 Totalbeløp

Gå til kasse