Veggkontroller - ZW129

ZW129-C
Ny produkt

kr. 728,00

7 enheter
på lager

- +

Legg til i sammenligningen

 
Mer info

 Z-Wave Plus Wall Mounted Controller WallMote from Aeotec - ZW129.

The WallMote is an intelligent Z-Wave Plus remote controller that mounted on a wall. It has 2 touch buttons that you can easily control the Z-Wave devices in your home network via touching, long pressing or sliding the button areas. Its surface has a RGB LED to indicate the button actions also accompanied by touch beep and vibration.
This Touch Controller comes with a magnet that enables keeping the device in the respective wall mount. In this way WallMote becomes a wall switch. You also can take the device away and use it as a portable remote control. The WallMote is powered by a rechargeable battery. No battery needs to be changed, but you'll have to think about recharging it from time to time (every 2 to 3 months depending on its use) via an USB-micro port located at the back side of device.

  • Communicates via Z-Wave Plus RF (868,42 MHz)
  • Range: up to 120m outdoors, up to 30m in buildings
  • Over The Air (OTA) firmware upgrades
  • Security: Supports AES-128 encryption
  • Supports Scenes and Associations
  • Scene Activation on IP Gateway (Up to 2 different scenes)
  • Group for Association: 5 (Group 1 support 1 node, Group 2 - 5 support 5 nodes)
  • Touch Sound and Touch Vibration features
  • Power supply: Rechargeable Lithium battery (3.7V/640mAh)
  • Battery charger input: Micro USB port (5V DC±0.5V, Max 1A)
  • Display elements: RGB LED
  • Contents of package: WallMote, Back-Mount plate, Double-Sided tape, Micro USB cable

Attention! The WallMote Controller cannot act as Z-Wave network administrator and will always need a Z-Wave (Primary) network controller to be included into a Z-Wave network.

Click here to visit Aeotec Support page for WallMote

 
Datablad
ProtokollZ-Wave Plus
EnhetstypePortable Remote Controller
Støtter Z-Wave Beaming Teknologi?Nei
Støtter Z-Wave Nettverkssikkerhet?Ja
Støtter Z-Wave AES-128 Sikkerhet S0?Ja
Støtter Z-Wave Sikkerhet S2?Nei
Firmware oppgraderbar?Ja
Nominell spenningInternt Litium batteri (3.7V/640mAh) som lades via USB
Driftstemperatur0°C ~ 40°C
BeskyttelseIP20
Størrelse (L x B x H) mm76.8 x 76.8 x 10.9 (w/mounting plate)
FargeHvit
 
Last ned

Brukerveiledning - ZW129

Installasjon og brukerveiledning - Aeotec ZW129

Last ned (313.39k)

Tech Manual - ZW129

Avansert Teknisk Brukerveiledning - Aeotec ZW129

Last ned (177.63k)

Skriv en produktanmeldelse

Veggkontroller - ZW129

Skriv en produktanmeldelse

 
Kommentarer(0)

Ingen kundeanmeldelser for øyeblikket.

23 andre produkter i samme kategori:

Kunder som kjøpte dette produktet kjøpte også:

Sam-lign 0

Ingen produkter

Avgjøres senere Frakt
kr. 0,00 Totalbeløp

Gå til kasse