Dimmer - ZMNHDD1

Ny produkt

kr. 454,40

15 enheter
på lager

- +

Legg til i sammenligningen


Mer info

Z-Wave Plus flush-mounted, 1-way Universal Dimmer from Qubino - ZMNHDD1 with Power Metering feature.

This flush-mounted dimmer module can be used for dimming of light or to manage the speed of fan.
Supports control of Low Voltage halogen bulb with electronic transformer and dimmable Compact Fluorescent light. Qubino dimmer supports also the Classical Incandescent lights, halogen lamps operated by 230VAC (High Voltage Halogen) and dimmable LED lights.

  • Communicates via Z-Wave Plus RF (868,42 MHz)
  • Range: up to 50m free field, up to 30m in buildings
  • Group for Association: 11 (Group 1 support 1 node, Group 2 - 11 support 16 nodes)
  • For ohmic, inductive and capacitive loads, e.g. incandescent lamps, dimmable wound transformers, dimmable electronic transformers, dimmable LED and CFL lamps (Do not connect any mixed loads)
  • With memory function of the last lighting level settings
  • Module supports mono-stable and bi-stable switches (input I1, I2, I3)
  • Module supports NO and NC contact type (input I2, I3)
  • Dimmer type: Trailing edge (bidirectional MOSFET switch)
  • Load: 140W (230V AC); 21W (24V DC) (for resistive loads)
  • Load for fan motor: Max 100W mono-phase asynchronous motor
  • Power Metering feature
  • Power measurement accuracy: ±2W
  • Power consumption: 0,7W
  • Temperature control via connected DS18B20 sensor (optional)
  • Support for temperature sensor offset settings

Attention! This dimmer module also suitable for dimming of low-voltage halogen lighting, CFL tube lamps and LED based lamps.
The dimmer does not work for every installation, because not every transformer, CFL or LED can be dimmed. Dimmable electronic transformers, CFLs and LEDs as standard is marked as "DIMMABLE".
Non compatible light device may work but is likely can produce light flickering and (or) an audible humming or buzzing noise when dimmed. This noise and (or) flickering is usually a symptoms of internal stress, which in turn can cause failure of the connected device or dimmer. Add 20-30% to the total lamp wattage on a transformer circuit or 50% on LEDs circuit. This provides a margin for transformer and LEDs losses when calculating circuit loadings.

ProtokollZ-Wave Plus
EnhetstypeSlave with routing capabilities, Multilevel Switch
Støtter Z-Wave Beaming teknologi?Ja
Støtter Z-Wave nettverkssikkerhet?Ja
Støtter Z-Wave AES-128 sikkerhet S0?Ja
Støtter Z-Wave sikkerhet S2?Nei
Firmware oppgraderbar?Ja
StyreelementMOSFET (Faseavsnitt dimmer)
Belastning140W (230V AC) / 21W (24V DC) (for resistiv last)
Nominell spenning110 - 230V AC ±10% 50/60Hz eller 24 - 30V DC
Driftstemperatur-10°C ~ 40°C
Størrelse (L x B x H) mm37 x 42 x 15,5
Last ned

Brukerveiledning - ZMNHDD1

Installasjon og brukerveiledning - Qubino ZMNHDD1

Last ned (538.14k)

Utvidet Manual - ZMNHDD1

Utvidet Teknisk Brukerveiledning - Qubino ZMNHDD1

Last ned (4.52M)

Skriv en produktanmeldelse

Dimmer - ZMNHDD1

Skriv en produktanmeldelse


Ingen kundeanmeldelser for øyeblikket.

30 andre produkter i samme kategori:

Kunder som kjøpte dette produktet kjøpte også:

Sam-lign 0

Ingen produkter

Avgjøres senere Frakt
kr. 0,00 Totalbeløp

Gå til kasse