Start Current Limiter

Start Current Limiter for problem loads protection.

Optimal protection for problem loads. To limit inrush currents in problem loads. Problem loads such as electronic ballasts, halogen lamps, energy saving lamps, incandescent lamps, LED power supplies and switching power supplies have a very high current consumption at the switching-on moment with the multiple of the nominal current and can thus destroy switching relays. With this accessory, the high current which can occur when electronic devices are switched on is limited to a harmless value. The inrush current for incandescent lamps can also be limited so that they reach a higher service life. In addition, a protection fuse is integrated. The inrush current limiter can be directly connected to the load circuit for loads up to 200 VA.The compact device can be installed in switch or distribution boxes or e.g. Lamp housings can be installed very easily. The device is simply installed in series with the load.

• Peak inrush current: 90A / 1 mS
• Load: Max. 200VA
• Connection: two flexible connection cables with approx. 100 mm length

IMPORTANT! Must only be installed by an authorized electrical installer. Private individuals who want to carry out work on the electrical system themselves must first study information from dsb (Directorate for Civil Protection and Emergency Planning) - Electrical work: You can do this yourself

Attention! The Max. connection power of 200VA must not be exceeded!