SALE
Lamp Module - LM15ES
Brand:
X-10 Screw-in Lamp Module (E27 socket) - LM15ES from Marmitek.
You can put this Lamp Module directly into the lamp socket. Can also be used with low-energy lamps. It is not possible to dim with this Lamp Module.
- Communicates via X-10 Powerline: 120 kHz ± 2 kHz / 2.5 Vpk-pk
- Signal Sensitivity: 15mVpp Min., 50mVpp Max. at 120kHz
- Input impedance: > 55 Ohm (L - N) at 120 kHz
- X-10 transmission: 1 puls burst on 0, 60 and 120 degrees
- Switching power: Max. 100W for open shades, Max. 60W for closed shades
- Socket: Type E27
- Fabric default device address: A2
LM15ES
Data sheet
- Protocol
- X-10
- Device Type
- Switch Module
- Executive Element
- Relay
- Load
- Max. 100W
- Nominal Voltage
- 230V AC ± 10%, 50Hz
- Operating Temperature
- -10°C ~ 50°C
- Protection
- IP20
- Dimensions D x H (mm)
- 46 x 93
- Color
- White
10 other products in the same category:
English
Norsk