
Z-Wave Plus wall-mounted, Roller Shutter - 9496 with Power Metering feature from TechniSat.
The TechniSat 9496 roller shutter designed as a drop-in replacement for your existing roller shutter and lets you operate the roller shutters in a smart home system controlled by Z-Wave. At the same time, its can still be switched UP and DOWN manually. What's more, you can determine how much electricity you use and this device can be integrated into complex schemes in smart home systems. So it's perfect for providing more home comfort.
The 9496 roller shutter can be installed in standard flush-mounted boxes (DIN 49073-1). The smart TechniSat flush-mounted insert is simply exchanged for the existing roller shutter. The rocker and frame of the existing device remain in place and are still used.
- Communicates via Z-Wave Plus RF (868,42 MHz)
- Range: up to 40m in buildings (depending on terrain and building structure)
- Group for Association: 2 (Group 1 support 1 node, Group 2 support 10 nodes)
- Security: Mode S0 with AES-128 and S2 encryption with PRNG
- Over The Air (OTA) firmware upgrades
- Supported Motors: Single phase, AC
- Maximum load: 400W or 1,7A (for Resistive Loads)
- Active Power and Energy metering functionality
- Supports Scene activation functionality via multiple button clicks
- Short circuit and overload protection monitoring
- Display elements: LED
- Power consumption: < 0,4W
- Device rocker and frame is not included in this delivery
IMPORTANT! Must only be installed by an authorized electrical installer. Private individuals who want to carry out work on the electrical system themselves must first study information from dsb (Directorate for Civil Protection and Emergency Planning) - Electrical work: You can do this yourself
Note: The smart TechniSat flush-mounted insert is simply exchanged for the existing roller shutter. The rocker and frame of the existing device remain in place and are still used. Compatible product ranges (Busch-Jaeger): Busch-Duro 2000® SI, Busch-Duro 2000® SI Linear, Reflex SI, Reflex SI Linear, future® linear, solo®, carat®, Busch-axcent®, alpha, Busch-balance® SI
Click here to visit TechniSat Support page for 9496 Roller Shutter
Data sheet
- Protocol
- Z-Wave Plus S2, Smart Start
- Device Type
- Slave with routing capabilities, Motor Control Class B
- Supports Z-Wave Beaming?
- Yes
- Supports Z-Wave Network Security?
- Yes
- Supports Z-Wave Security S0?
- Yes
- Supports Z-Wave Security S2?
- Yes
- Smart Start Compatible?
- Yes
- Firmware Upgradable?
- Yes
- Power Metering Feature?
- Yes
- Executive Element
- Relays
- Switching Capacity
- Up to 1.7A for motors
- Nominal Voltage
- 230V, 50Hz ±10%
- Operating Temperature
- 5°C ~ 35°C
- Protection
- IP20
- Dimensions L x W x H (mm)
- 70 x 70 x 45
- Color
- White