Roller Shutter - ZMNHCD1

Z-Wave Plus flush-mounted, 1-way Roller Shutter - ZMNHCD1 with Power Metering feature.

This module is used to control the motor of blinds, rollers, shades, garage doors, gates, venetian blinds, etc… Also support venetian blind slats tilting. Precise positioning is supported for motors equipped with mechanical or electronic end switches. The module is designed to be mounted inside a “flush mounting box”, hidden behind a traditional wall switch. Module measures power consumption of motor and support connection of digital temperature sensor. It is designed to act as repeater in order to improve range and stability of Z-Wave based network.

• Communicates via Z-Wave Plus RF (868,42 MHz)
• Range: up to 50m free field, up to 30m in buildings
• Group for Association: 9 (Group 1 support 1 node, Group 2 - 9 support 16 nodes)
• Rated load current of AC output (resistive load)*: 2 x 4A (230V AC)
• Output circuit power of AC output (resistive load) = 2 X 920W (230V AC)
• Power measurement accuracy: 0 - 200W (±2W); ˃ 200W (±3%)
• Supported limit switches: Mechanical and Electronical
• Power consumption: 0,4W
• Temperature control via connected DS18B20 sensor (optional)

IMPORTANT! Must only be installed by an authorized electrical installer. Private individuals who want to carry out work on the electrical system themselves must first study information from dsb (Directorate for Civil Protection and Emergency Planning) - Electrical work: You can do this yourself

* In case of load other than resistive, pay attention to the value of cos φ and if necessary apply load lower than the rated load. Max current for cos φ=0,4 is 2A at 250V AC.

Click here to visit Qubino Products Compatibility List