Radiator Termostat - 10101

Z-Wave Radiator Thermostat - 10101 fra Popp.

This radiator thermostat is mounted on wall heating valves and controls them by a motor. The device accepts a setpoint that is either set manually using buttons on the device or wirelessly using Z-Wave. Afterwards, the device will regulate the warm water supply to the wall radiator and compare the detected temperature to ensure, that the temperature in the room is kept at the desired level. A small LCD panel on the device displays the setpoint temperature on request.
The device has an internal scheduler, that allows to define up to 9 setpoint for up to 7 week days. Once programmed, these setpoints will be activated without any further manual or wireless interaction. Beside setting a desired temperature the device will support special heating schemes, such as energy saving and frost protection and intelligent functions such as detection of open windows or a valve training function to ensure that valves are still operational after longer periods.
Compared with the Danfoss living connect® thermostat the Popp 10101 thermostat will report the room temperature as detected and calculated by the device’s temperature sensor to the Z-Wave gateway.

• Communicates via Z-Wave RF (868,42 MHz)
• Range: up to 30m in buildings
• Temperature range: 8 - 28°C
• Maximum water temperature: 90°C
• "Open window" function
• Temperature sampling: Measures temperature every minute
• Synchronizing: Every 5 minutes
• Actuator type: Electromechanical
• Movement type: Linear
• Spindle movement: 2 - 3 mm on the valve
• Maximum extension: 4,5 mm
• Speed of adjustment: 1 mm/s
• Power consumption: 3 mW in standby, 1.2W when active
• Digital Screen/display with backlit

 NB! The Popp 10101 radiator thermostat supplied with adapters for Danfoss RA 2000 valves and valves with M30X1.5 (K) connection.

Klikk her for å besøke Aeotec supportsiden for Radiator termostat