Roller Shutter - ZG9080A

ZigBee 3.0 flush-mounted, 1-way Roller Shutter - ZG9080A from Sunricher.

Sunricher Roller Shutter is a ZigBee 3.0 motor controller specifically used to enable ZigBee command and control (up/down/stop) for existing window covering motors. It can also be connected to external manual switches/buttons to control the motor up/down/stop independently. Full support for various curtain types: roller blinds, Venetian blinds and curtains. The ZG9080A motor controller allows for precise positioning of a roller blind or Venetian blind slats that are equipped with motors with both mechanic or electronic end switches. As the unit will control resistive, capacitive and inductive loads, it can also be used to switch mains powered lighting products.

• Communicates via ZigBee 3.0 RF (2,4 GHz)
• RF Range Typical: 40 meters
• Compatible with universal ZigBee Master Controller/Coordinator
• Supports Touchlink commissioning
• Supports Find and Bind mode to bind a ZigBee remote directly without coordinator
• Supports ZigBee Green Power and can bind to and be controlled by max. 20 (GP) remotes
• Over The Air (OTA) firmware upgrades
• Motor type: Single-phase AC asynchronous motor
• Maximum load: 2,0A for motors
• Supported limit switches: Mechanical and Electronical
• Surge and Overload Protection
• Max standby power: < 1W

IMPORTANT! Must only be installed by an authorized electrical installer. Private individuals who want to carry out work on the electrical system themselves must first study information from dsb (Directorate for Civil Protection and Emergency Planning) - Electrical work: You can do this yourself

Click here to visit ZG9080A Products Compatibility List