Fan Coil Thermostat - HE-FT01

Z-Wave Plus V2 Fan Coil Thermostat - HE-FT01 from Heltun.

The HELTUN HE-FT01 Advanced Programmable Thermostat for Fan Coil Heating/Cooling systems can be flush mounted over standard round or square electrical junction boxes. It is designed to maintain a constant room temperature using internal air temperature sensor.
It is recommended for control of air conditioning/heating systems such as: split/multi-split systems, chillers and fan coil unit systems, central air conditioning systems, multi-zone VRF/VRV air conditioning systems, etc. The fan speed is controlled by three relay outputs. Two more relay outputs control cooling and heating valves. The HE-FT01 has two independent inputs for relay channels which allow it to control fans and valves with different power sources or to use relay outputs as dry contacts. Each relay can carry a load of up to 5A.
The HE-FT01 has an LCD screen with auto-sensing or manually adjustable brightness control, six sensitive capacitive touch-control buttons, and internal sensors for air temperature and humidity. The HE-FT01 is also equipped with light sensor and software energy consumption logic.
The HE-FT01 integrates a Z-Wave 700 platform module allowing it to be used with Z-Wave home automation systems. The HE-FT01 supports Z-Wave ‘S0’ and ‘S2’ security protocols, SmartStart technology, and can be connected (“associated”) to 50 other Z-Wave devices, such as relays, switchers, etc.
You can select one of four operation modes (COM, TIME, ECO, OFF) either manually, or by using a Z-Wave controller/gateway. The HE-FT01 operates in four Climate Modes: Heating & Cooling, Heating only, Cooling only, Ventilation, and has six levels for fan speed control: Low, Medium, High, Auto Medium, Auto High, Off.
The display has a user-friendly interface, showing: air temperature, humidity level, user set point, operating mode, climate mode, fan speed, time, weekday and Z-Wave network status. Display brightness adjusts to ambient light conditions automatically making it always easy to read.

• Communicates via Z-Wave Plus V2 RF (868,42 MHz)
• RF Range Typical: up to 100m in a free field, up to 30m in buildings
• Standard and enhanced security: Non-Secure, S0 and S2 Unauthorized, S2 Authorized with Key
• Over The Air (OTA) firmware upgrades
• Group for Association: 6 (Group 1 support 1 node, Group 2 - 6 support 1 node)
• Display: LCD-display 73 x 42mm, black with white icons
• Display brightness adjustable feature
• Four Operational Modes: COM, ECO, TIME, OFF
• Four Climate Modes: Heating & Cooling, Heating only, Cooling only, Ventilation only
• Six Fan Speed control modes: Low speed, Medium speed, High speed, Auto Medium speed, Auto High speed, Off
• Four Time Schedules for 7 days of the week: Morning, Day, Evening, Night
• Hysteresis adjustable range: 0,2°C to 10°C (default: 0,5°C)
• Measured temperature range: -30°C to +80°C
• Temperature measurement accuracy: ±0.5°C
• Temperature set intervals: 4.0°C to 37.0°C
• Measured humidity range: 0 - 80% RH
• Humidity measurement accuracy: ±3.0% RH
• Internal ambient light sensor measuring range: 0 - 30000 Lux
• 2 independent relays input
• 5 relays for resistive load up to 5A each
• Child lock feature
• Energy consumption meter
• Power Supply: 85 - 265VAC 50Hz/60Hz, 24 - 48VDC
• Power Consumption: 1W

IMPORTANT! Must only be installed by an authorized electrical installer. Private individuals who want to carry out work on the electrical system themselves must first study information from dsb (Directorate for Civil Protection and Emergency Planning) - Electrical work: You can do this yourself

Click here to visit Heltun Support page for Z-Wave 700 Fan Coil Thermostat - HE-FT01