Thermostat for Fan Coil

Z-Wave Controlled Thermostat - MH8 series from MCOHome.

MCOHome Fan Coil Thermostat is a Z-Wave enabled device for indoor temperature control. It is mainly applied to a 2-pipe or 4-pipe Fan Coil system. It can read room temperature, show local time, and automatically control fan speed based on the temperature difference. The device can be included and operated in any Z-Wave network with other Z-Wave certified products from any other manufacturers.

• Communicates via Z-Wave RF (868,42 MHz)
• Range: up to 30m in buildings
• Group for Association: 1 (Group used for state reporting only)
• Applied to control Fan Coil of central AC
• Tempered glass panel with capacitive buttons
• Clear display with basic control information
• With Cooling, Heating, Ventilation modes
• Precise temperature calibration function
• Non-volatile Memory, working state saved even power failure
• Intelligent ON/OFF control of 3-speed fan, electric (ball) valve or air-valve
• Internal Temperature Sensor: NTC 15KΩ
• Temperature Setting：5 - 35℃ （Adjustable）
• Display Accuracy: 0.1℃
• Switching capacity: ≤ 3A
• Power consumption: < 1W
• Easily steel frame back plate installation
• Installation: flush mounted in 86 x 86mm junction box

IMPORTANT! Must only be installed by an authorized electrical installer. Private individuals who want to carry out work on the electrical system themselves must first study information from dsb (Directorate for Civil Protection and Emergency Planning) - Electrical work: You can do this yourself

Attention! This device won't fit into a standard wall box (∅ 60 mm).