Bryter 1-veis - FGS-214

Z-Wave Plus 1-veis bryter med potensialfri reléutgang for innfelt montering fra Fibaro - FGS-214.

Thanks to its small size it can be mounted in junction boxes or inside device casings. The module is controlled either through the Z-Wave network or with buttons connected directly. Supports Z-Wave network Security Modes: S0 with AES-128 encryption and S2 Authenticated with PRNG-based encryption. Works as a Z-Wave signal repeater (all non-battery operated devices within the network will act as repeaters to increase reliability of the network). May be used with all devices certified with the Z-Wave Plus certificate and should be compatible with such devices produced by other manufacturers.

• Communicates via Z-Wave Plus RF (868,42 MHz)
• Range: up to 50m free field, up to 40m in buildings
• Security: Mode S0 with AES-128 and S2 encryption with PRNG
• Over The Air (OTA) firmware upgrades
• Group for Association: 2 (Group 1 support 1 node, Group 2 support 5 nodes)
• Works with various types of switches and buttons
• Compatible load types: Resistive or Incandescent only
• Rated load output: 6,5A
• Alarm data frames support
• Built-in scene activation mechanism
• Z-Wave network coverage tester feature
• Power consumption: < 1.3W

VIKTIG! Kan kun installeres av en autorisert elektroinstallatør fra registrert installasjonsvirksomhet. Privatpersoner som ønsker selv utføre arbeid på det elektriske anlegget må studere først info fra dsb (Direktoratet for samfunnssikkerhet og beredskap) - Elektrisk arbeid: Dette kan du gjøre selv

OBS! Denne brytermodulen har potensialfri reléutgang.

Klikk her for å besøke Fibaro supportsiden for Smart modul