Dimmer - D070K2-ZG

ZigBee 3.0 flush-mounted Dimmer - D070K2-ZG from HZC electric.

The D070K2-ZG is an innovative AC phase-cut dimmer with ZigBee 3.0 control interface. The innovative minimum brightness setting function enables users to set a minimum and maximum level for brightness, also dimming speed level. Work with: Amazon Alexa, Google Assistant Home, Philips hue and more.

• Communicates via ZigBee 3.0 RF (2,4 GHz)
• RF Range Typical: 40 meters
• Functions: Switch ON, switch OFF, DIM
• Compatible with universal ZigBee Master Controller/Coordinator
• Supports Touchlink commissioning
• Supports Find and Bind mode to bind a ZigBee remote directly without coordinator
• Prepared for OTA software update
• Dimmer type: Trailing edge (bidirectional MOSFET switch)
• 1 inputs for existing wired wall switch
• Innovative minimum, maximum brightness and dimming speed setting functions
• Soft start function
• Supported Loads: 5 - 250VA LED, 5 - 250W Halogen/Incandescent lamps
• Supports both 2-wire and 3-wire connections

IMPORTANT! Must only be installed by an authorized electrical installer. Private individuals who want to carry out work on the electrical system themselves must first study information from dsb (Directorate for Civil Protection and Emergency Planning) - Electrical work: You can do this yourself

Attention! This dimmer module suitable for dimming of low-voltage halogen lighting and LED based lamps. The dimmer does not work for every installation, because not every transformer or LED can be dimmed. Dimmable electronic transformers and LEDs as standard is marked as "DIMMABLE".
Non compatible light device may work but is likely can produce light flickering and (or) an audible humming or buzzing noise when dimmed. This noise and (or) flickering is usually a symptoms of internal stress, which in turn can cause failure of the connected device or dimmer. Always confer with professional installer.