Dimmer - ZG9040A

ZigBee 3.0 flush-mounted Dimmer with Power Metering feature - ZG9040A from Sunricher.

The ZG9040A is an innovative AC phase-cut dimmer with ZigBee 3.0 control interface. It can be connected in two-wire or three-wire configuration so it can operate with or without neutral (N) wire. The dimmer can switch or dim connected light source either through ZigBee network or through the wall switch connected directly to it. The innovative minimum brightness setting function enables users to set a minimum brightness level. Work with: Apple HomeKit, Amazon Echo Plus, Philips hue, Google Assistant SDK.

• Communicates via ZigBee 3.0 RF (2,4 GHz)
• RF Range Typical: 40 meters
• Functions: Switch ON, switch OFF, DIM
• Compatible with universal ZigBee Master Controller/Coordinator
• Supports Touchlink commissioning
• Supports Find and Bind mode to bind a ZigBee remote directly without coordinator
• Supports ZigBee Green Power and can bind to and be controlled by max. 20 (GP) remotes
• Prepared for OTA software update
• Works with various types of existing wired wall switches – momentary, toggle, three-way
• Implemented algorithm of smart light source detection
• With memory function of the last lighting level settings
• Innovative minimum brightness setting function
• Active power and energy metering functionality
• Dimmer type: Trailing edge (bidirectional MOSFET switch)
• Supported Loads: (Look User/Installation manual for more information)
• Load: Max 400W (for resistive loads)
• Surge and Overload Protection
• Max standby power: < 1W

IMPORTANT! Must only be installed by an authorized electrical installer. Private individuals who want to carry out work on the electrical system themselves must first study information from dsb (Directorate for Civil Protection and Emergency Planning) - Electrical work: You can do this yourself

Attention! This dimmer module suitable for dimming of low-voltage halogen lighting and LED based lamps. The dimmer does not work for every installation, because not every transformer or LED can be dimmed. Dimmable electronic transformers and LEDs as standard is marked as "DIMMABLE".
Non compatible light device may work but is likely can produce light flickering and (or) an audible humming or buzzing noise when dimmed. This noise and (or) flickering is usually a symptoms of internal stress, which in turn can cause failure of the connected device or dimmer. Always confer with professional installer.

Click here to visit ZG9040A Products Compatibility List