Switch 5-way - HE-RS01

Z-Wave Plus V2 flush-mounted, 5-way Switch from Heltun - HE-RS01.

The HELTUN HE-RS01 Advanced Programmable Relay Switch ‘Quinto’ (i.e. five-channel) designed to fit inside standard round, square, or rectangular electrical junction boxes installed behind an existing inwall switch or inside a circuit breaker panel. Relay Switch Quinto enables On/Off controls of lights, dimmers, blinds, doors, gates, valves, and motors either manually by a direct-connected switch, or remotely through a Z-Wave™ network.
Thanks to the HE-RS01 five-channel relays it can manage up to five On/Off devices, or three On/Off devices and one two-direction motors, or one On/Off device and two two-direction motors. It has two independent inputs for relay channels which allow it to control systems with different power sources or to use relay outputs as dry contacts. Each relay can be loaded up to five amps and uses the HELTUN Advanced Zero-Cross Technology to increase the life of the device and connected system.
The HE-RS01 can also be used to manage motorized systems; e.g. garage doors, window blinds, etc. It allows association with relay switches and roller shutters to control the opening and closing of the system. The HE-RS01 has an onboard Real Time Clock (RTC) that enables scenarios where connected devices can be triggered on a schedule. The HE-RS01 has five fully configurable inputs for external switches. Each input can be configured to control the relay output state (from one to five) in any of nine different modes. The inputs also can be used to activate scenes on a Z-Wave Master Controller.
The HE-RS01 integrates a Z-Wave Plus™ V2, 700 platform module allowing it to be used with Z-Wave home automation systems. It supports Z-Wave ‘S0’ and ‘S2’ security protocols, SmartStart technology, and can be connected (i.e. “associated”) with up to 15 other Z-Wave devices, such as relays, switches, dimmers, motor controllers, etc. The HE-RS01 is also an excellent choice for managing lighting systems, allowing association to Z-Wave dimmers controlling both On and Off as well as smooth brighten (Up) and smooth dim (Down) states using external switches connected to HE-RS01 inputs.

• Communicates via Z-Wave Plus V2 RF (868,42 MHz)
• RF Range Typical: up to 100m in a free field, up to 30m in buildings
• Standard and enhanced security: Non-Secure, S0 and S2 Unauthorized, S2 Authorized with Key
• Over The Air (OTA) firmware upgrades
• Supports Scenes and Associations
• Group for Association: 16 (Group 1 support 1 node; Group 2 - 16 supports 5 nodes)
• Each external input can trigger scenes (i.e. acts like scene controller)
• Relay switching with HELTUN Advanced Zero-Crossing Technology
• 5 channel relay output, resistive load up to 5A each
• Each relay can be controlled by a timer or on a week schedule
• Two independent relays inputs, dry contact
• Ten modes available for each relay: 1 - Switch ON; 2 - Switch OFF; 3 - Timer: ON>OFF; 4 - Timer Reversed: OFF>ON; 5 - Inverse; 6 - Two Relay Inverse; 7 - Momentary; 8 - Momentary Reversed; 9 - Momentary Toggle; 10 - Roller Shutter
• Power Consumption logic monitors energy usage
• Power consumption: 1W

IMPORTANT! Must only be installed by an authorized electrical installer. Private individuals who want to carry out work on the electrical system themselves must first study information from dsb (Directorate for Civil Protection and Emergency Planning) - Electrical work: You can do this yourself

Attention! This switch module have potential free relay contacts.

Click here to visit Heltun Support page for Z-Wave 700 Relay Switch quinto (5 channels) - HE-RS01