Z-Wave Plus V2 window handle - eHandle ConnectSense Amsterdam from Hoppe.
Monitors the status of windows in your Smart Home
The eWindow handle ConnectSense reliably detects break-in attempts on the window and reports them to the smart home control center. For this purpose, both the position of the handle (closed, tilted, open) and that of the window sash (closed, open) are detected and reported. The constant comparison of handle and sash position accurately detects whether a window is actually open or whether only the handle is in the open position without the sash having been moved. The ConnectSense eWindow handle offers extensive functions for monitoring the window status in the building - even on the move via smartphone message if required.
Detects attempted window break-in
A special algorithm distinguishes between an actual break-in attempt (e.g., prying open the window) and an accidental shake (e.g., caused by children playing ball). Users can define deterrent measures via their smart home control panel, which are triggered when an attempted break-in is detected.
Provides more convenience
Independently of the burglary attempt detection, the eWindow handle ConnectSense can be used to define scenarios that provide more energy efficiency and comfort. For example:
Automatic throttling of heating or air conditioning when the window is open for ventilation
Automatic closing of the roller shutters only when the patio door is closed
Other scenarios are possible - depending on the setup of the smart home system and the preferences of the occupants.
Transmission security
The ConnectSense eWindow handle works with the standard Z-Wave Plus wireless protocol. It is equipped with the current "S2" security standard and establishes encrypted communication in combination with a Z-Wave Plus smart home control center. The radio signal is transmitted to the smart home control center both cyclically (e.g. every hour) and when the handle is operated or in the event of a break-in attempt.
- Communicates via Z-Wave Plus V2 RF (868,42 MHz)
- RF Range Typical: up to 100m in a free field, up to 30m in buildings
- Group for Association: 4 (Max. 5 nodes per Group)
- Security: S2 (AES-128 encryption)
- Over The Air (OTA) firmware upgrades
- Pin Length: 32 - 42mm
- Screws included: M5x35/40
Note: Measure the pin length of your existing door handle before you order. Installation distance between fastening screws on the window (from center to center): 43 mm.
Data sheet
- Protocol
- Z-Wave Plus V2
- Device Type
- Window handle
- Supports Z-Wave Security S2?
- Yes
- Smart Start Compatible?
- Yes
- Firmware Upgradable?
- Yes
- Nominal Voltage
- 1x (3.6V) Lithium LS14500 battery
- Operating Temperature
- 0°C ~ 50°C
- Protection
- IP20
- Dimensions L x W x H (mm)
- 160 x 112 x 35
- Color
- White