Dimmer - ZMNHHD1

Z-Wave Plus flush-mounted, 1-way Universal Dimmer from Qubino - ZMNHHD1 with Power Metering feature.

This Qubino flush-mounted dimmer module can be used for dimming of Low Voltage halogen bulb with electronic transformer and dimmable Compact Fluorescent light. Also supports the Classical Incandescent lights, halogen lamps operated by 230VAC (High Voltage Halogen) and dimmable LED lights.

• Communicates via Z-Wave Plus RF (868,42 MHz)
• Range: up to 50m free field, up to 30m in buildings
• Group for Association: 4 (Group 1 support 1 node, Group 2 - 4 support 16 nodes)
• Supports encryption mode: S0, S2
• Support: Beaming and Z-Wave explorer frames
• Over The Air (OTA) firmware upgrades
• For ohmic, inductive and capacitive loads, e.g. incandescent lamps, dimmable electronic transformers, dimmable LED and CFL lamps (Do not connect any mixed loads)
• With memory function of the last lighting level settings
• Module supports mono-stable and bi-stable switches
• Dimmer type: Trailing edge (bidirectional MOSFET switch)
• Conventional incandescent and halogen lights load: 200W (230V AC); 21W (24V DC)
• LED bulb, compact fluorescent bulb (CFL) load: 40W (230V AC)
• LVH Electronic transformer load: 70W (240V AC)
• Supports both 2-wire and 3-wire connections
• Power Metering feature
• Power measurement accuracy (3-wire connection): ±2%
• Power consumption: 0,4W

IMPORTANT! Must only be installed by an authorized electrical installer. Private individuals who want to carry out work on the electrical system themselves must first study information from dsb (Directorate for Civil Protection and Emergency Planning) - Electrical work: You can do this yourself

Attention! This dimmer module also suitable for dimming of high and low-voltage halogen lighting, CFL tube lamps and LED based lamps.
The dimmer does not work for every installation, because not every transformer, CFL or LED can be dimmed. Dimmable electronic transformers, CFLs and LEDs as standard is marked as "DIMMABLE".
Non compatible light device may work but is likely can produce light flickering and (or) an audible humming or buzzing noise when dimmed. This noise and (or) flickering is usually a symptoms of internal stress, which in turn can cause failure of the connected device or dimmer. Always confer with professional installer.

Click here to visit Qubino Support page for Mini Dimmer

Click here to visit Qubino Products Compatibility List