Dimmer - WTED

Z-Wave Plus flush-mounted Universal Dimmer from WiDom - WTED with Power Metering feature.

WiDom Smart TE Dimmer is an "in-wall device" that controls the luminosity level and/or fan speed. A universal device that controls the light intensity of all types of dimmable lights, including LED lamps and energy-saving lamps. The Smart TE Dimmer includes the ON / OFF control option of non-dimmable loads.
WiDom Smart TE Dimmer is very easy to install and works with both momentary and toggle switches. It operates in any Z-Wave network with other Z-Wave/Z-Wave Plus certified devices and controllers from any other manufacturer. As a constantly powered node, WiDom Smart TE Dimmer will act as repeater regardless of the vendor in order to increase the reliability of the network.

• Communicates via Z-Wave Plus RF (868,42 MHz)
• Range: up to 100m free field, up to 40m in buildings
• Group for Association: 2 (Max 8 nodes per Group)
• Supports encryption mode: S0, S2
• Over The Air (OTA) firmware upgrades
• For resistive, inductive and capacitive loads (Do not connect any mixed loads)
• With memory function of the last lighting level settings
• Works with various types of switches – momentary, toggle
• Dimmer type: Universal (Double Power MOSFET switch)
• Maximum load: 300W (for resistive loads)
• Load for fan motor: Max 100W mono-phase asynchronous motor
• Power consumption meter
• System temperature limitation: 105°C
• Max standby power: < 1W

IMPORTANT! Must only be installed by an authorized electrical installer. Private individuals who want to carry out work on the electrical system themselves must first study information from dsb (Directorate for Civil Protection and Emergency Planning) - Electrical work: You can do this yourself

Attention! This dimmer module suitable also for dimming of halogen lighting and LED based lamps. The dimmer does not work for every installation, because not every transformer or LED can be dimmed. Dimmable electronic transformers and LEDs as standard is marked as "DIMMABLE". Note: 230V (HV) halogen lamps and some of the LED based light sources have very high starting current.
Non compatible light device may work but is likely can produce light flickering and (or) an audible humming or buzzing noise when dimmed. This noise and (or) flickering is usually a symptoms of internal stress, which in turn can cause failure of the connected device or dimmer. Always confer with professional installer.