Switch 2x SPDT - PAN07

Z-Wave Plus flush-mounted 2x SPDT Switch from Philio - PAN07 with Power Metering feature.

Two SPDT (Single Pole Double Throw) Switch and two meter inside.
A Single Pole Double Throw (SPDT) switch is a switch that only has a single input and can connect to and switch between 2 outputs. This means it has one input terminal and two output terminals. A Single Pole Double Throw switch can serve a variety of functions in a circuit. It can serve as an ON/OFF switch, depending on how the circuit is wired. Or it can serve to connect circuits to any 2 various paths that a circuit may need to function in.

• Communicates via Z-Wave Plus RF (868,42 MHz)
• RF Range: up to 100m free field, up to 40m in buildings
• Group for Association: 3 (1 node per Group)
• Support: Beaming and Z-Wave Network Security
• Over The Air (OTA) firmware upgrades
• Functions: Switch ON, switch OFF, Power Metering
• Potential free contacts (Two dry contact relay)
• Intelligent Opening/Closing of the Relay (Zero crossing technology)
• Can be operated by mono-stable or bi-stable push-buttons
• Load: 2x 1100W (for resistive loads)
• Overload protection
• Status Indicator: LED

IMPORTANT! Must only be installed by an authorized electrical installer. Private individuals who want to carry out work on the electrical system themselves must first study information from dsb (Directorate for Civil Protection and Emergency Planning) - Electrical work: You can do this yourself

Attention! This switch module don't have potential free relay output.