Switch 2-way - WDS1.04

Z-Wave Plus flush-mounted, 2-way Switch from wiDom - WDS1.04 with Electric Parameters Metering feature.

Universal Double Switch is an ON/OFF control device designed to independently control two separate loads, suited for use as both a local and remote switch. Similarly to the other WiDom “in wall” devices, it can be fully integrated into pre-existing systems and configured to associate configurable behaviours to a specific number of clicks, in full integration with the Z-Wave home automation ecosystem. Each of its two channels features an integrated consumption measurement device. The Universal Double Switch also boasts the lowest energy consumption on the market.
At the same time, it is completely configurable so that it can adapt to the most varied needs while also being ready to be used without needing additional configurations in order to operate. Thanks to the framework developed by WiDom, the various types of “events” on the “External Switch” can be recognised and associated to actions to be performed on the device, on any associated devices, on all devices on the network. The events that the system recognises are the number of “clicks” or hold on the External Switch.

• Communicates via Z-Wave Plus RF (868,42 MHz)
• Range: up to 100m free field, up to 40m in buildings
• Group for Association: 5 (Max 8 nodes per Group)
• Support: Beaming and Z-Wave explorer frames
• Over The Air (OTA) firmware upgrades
• Functions: Switch ON, switch OFF, Electric Parameters Metering
• Intelligent Opening/Closing of the Relay (zero current or zero voltage switching)
• Module supports mono-stable switches (push button) and bi-stable switches
• Resistive Loads: 8A for each channel (10A for both channels)
• Power consumption: <260 mW in standby and <480 mW with one working load; <700 mW with both working loads

IMPORTANT! Must only be installed by an authorized electrical installer. Private individuals who want to carry out work on the electrical system themselves must first study information from dsb (Directorate for Civil Protection and Emergency Planning) - Electrical work: You can do this yourself