RGBW Controller - ZMNHWD1

Z-Wave Plus flush-mounted, RGBW Controller - ZMNHWD1.

The Qubino RGBW Controller is designed to control your RGB/RGBW strips and LED strips or bulbs in order to create countless color options and includes 5 special scene effects (Ocean, Lightning, Rainbow, Snow and Sun). The wide range of colors lets you "paint" your home according to your mood. Highlight your favourite wall by illuminating a picture on it in tones that you choose yourself. The module can work in combination with the other Z-Wave devices in your house. You can control it either remotely through the Z-Wave network or through wall switches.

• Communicates via Z-Wave Plus RF (868,42 MHz)
• Range: up to 30m in buildings
• Group for Association: 1 (Max 5 nodes)
• Prepared for wireless software update
• Module supports mono-stable and bi-stable switches
• PWM output frequency: 488Hz
• Additional features: 100KΩ sensors signal readouts
• Max Load (e.g. halogen bulbs): at 12V = 156W combined, at 24V = 312W combined
• Rated Output: 8A for single output channel, 13A at Max (3,25A for RGBW single output channel is suggested)
• For installation in boxes: Ø ≥ 60 mm or 2M
• Power consumption: 0,48 - 0,72W

IMPORTANT! Must only be installed by an authorized electrical installer. Private individuals who want to carry out work on the electrical system themselves must first study information from dsb (Directorate for Civil Protection and Emergency Planning) - Electrical work: You can do this yourself

Click here to visit Qubino Products Compatibility List