Dimmer - 9497

Z-Wave Plus Wall Mounted Universal Dimmer with Power Metering feature - 9497 from TechniSat.

The TechniSat 9497 dimmer designed as a drop-in replacement for your wall dimmer and lets you operate a ceiling lamp in a smart home system controlled by Z-Wave. At the same time, the dimmer itself can still be switched ON and OFF manually. What's more, you can determine how much electricity you use and the switch can be integrated into complex schemes in smart home systems. So it's perfect for providing more home comfort.
The dimmer can be installed in standard flush-mounted boxes (DIN 49073-1). The smart TechniSat flush-mounted insert is simply exchanged for the existing dimmer insert. The rocker and frame of the existing switch remain in place and are still used. Integrated 230V auxiliary input for push buttons or toggle switch types, applicable in alternating switching and or intermediate switching circuits.

• Communicates via Z-Wave Plus RF (868,42 MHz)
• Range: up to 40m in buildings (depending on terrain and building structure)
• Group for Association: 2 (Group 1 support 1 node, Group 2 support 10 nodes)
• Security: Mode S0 with AES-128 and S2 encryption with PRNG
• Support: Beaming and Z-Wave explorer frames
• Over The Air (OTA) firmware upgrades
• Dimmer type: Universal (bidirectional MOSFET switch)
• Supported Loads: (Look User/Installation manual for more information)
• Supports Scene activation functionality via multiple button clicks
• Dimming curve selection
• Soft start function
• With memory function of the last lighting level settings
• Active Power and Energy metering functionality
• Load: Max 200W/0,87A (for resistive loads)
• Short circuit and overload protection monitoring
• Display elements: LED
• Max standby power: < 0,5W
• Device rocker and frame is not included in this delivery

IMPORTANT! Must only be installed by an authorized electrical installer. Private individuals who want to carry out work on the electrical system themselves must first study information from dsb (Directorate for Civil Protection and Emergency Planning) - Electrical work: You can do this yourself

Note: The smart TechniSat flush-mounted insert is simply exchanged for the existing dimmer. The rocker and frame of the existing device remain in place and are still used. Compatible product ranges (Busch-Jaeger): Busch-Duro 2000® SI, Busch-Duro 2000® SI Linear, Reflex SI, Reflex SI Linear, future® linear, solo®, carat®, Busch-axcent®, alpha, Busch-balance® SI

Attention! This dimmer module suitable for dimming of low-voltage halogen lighting and LED based lamps. The dimmer does not work for every installation, because not every transformer or LED can be dimmed. Dimmable electronic transformers and LEDs as standard is marked as "DIMMABLE".
Non compatible light device may work but is likely can produce light flickering and (or) an audible humming or buzzing noise when dimmed. This noise and (or) flickering is usually a symptoms of internal stress, which in turn can cause failure of the connected device or dimmer. Always confer with professional installer.

Click here to visit TechniSat Support page for 9497 Dimmer